A damaged motherboard isn’t the sole cause of a computer’s inability to start. However, while diagnosing a PC, it is critical to discover whether the motherboard is faulty. Here are a few typical visual and diagnostic techniques for determining if a motherboard is bad or dead.
Must Read Reviews about best b450 Motherboards In 2022
DISCONNECT ALL COMPONENTS EXCEPT OF POWER SUPPLY UNIT
The first step is to determine if the problem is with the motherboard or with the linked components.
Disconnect all components, including the CPU, RAM, Hard Disk, and any other attached peripheral devices like as keyboards, USB drives, and so on.
You should bench test for this, which means taking the motherboard out of the PC case and placing it on an anti-static substance.
Connect the Power Supply wires to the motherboard and turn it on by jumping the power ON pins on the Front Panel Header.
CHECK THE CMOS BATTERY
A dead CMOS battery is often the cause of a dead motherboard.
The CMOS battery is in charge of powering up the BIOS. It keeps the system settings even if you power off your computer.
The motherboard becomes unusable when the CMOS battery dies.
This, however, is a pretty straightforward repair. Simply identify the CMOS battery on your motherboard (which is difficult to overlook) and replace it with the right coin battery.
CHECK WHETHER THE MOTHERBOARD PERFORMS POST ON THE SCREEN
When certain motherboards power up, the POST screen appears.
A Power-On Self-Test (POST) is the first test performed by the motherboard to ensure that all of the hardware and sub-components are in good working order.
If an error is found in any of the important components, such as the CPU, RAM, hard drive, or even the motherboard itself, the POST screen may show the fault, indicating the location of the problem.
IMPORTANT POINTS TO KEEP IN MIND
To begin, if your motherboard is executing the POST function and showing it on the screen, it is likely that the motherboard is in good functioning order.
A dead motherboard often does not show any screen at all.
Furthermore, if the CPU is not connected to the motherboard or if the CPU is defective, no POST screen will be shown since the CPU powers the video output ports on the motherboard.
EXAMINE THE POST LED AND THE BEEP CODE SPEAKER
When the system encounters a problem, some motherboards have status LEDs or beepers that broadcast different error codes.
SPEAKER WITH BEEP CODE
If your motherboard does not show the POST screen, it may output POST function Beep Codes to identify the source of the problem.
Many motherboards have a beep code speaker. The beep code speaker is often paired with the PC chassis. If your system does not have a beep code speaker, you may get one from an IT retailer.
- 1 Beep – issues with the memory
- 2 Beeps – issues with the motherboard
- 5 Beeps – issues with the CPU
- 9 Beeps – indicate problem with ROM or BIOS
LED INDICATORS
LED indicators are used on certain motherboards to display the status of different components. The quantity of LEDs and what they indicate will vary depending on the design of each manufacturer.
To understand what the LED lights imply, see the handbook for your motherboard.
EXAMINE YOUR MOTHERBOARD USING A DIFFERENT SET OF COMPONENTS
One extreme technique is to test your motherboard with a different set of CPU, RAM, Hard Disk, and Power Supply Unit.
If the problem remains, the issue is very probably with the motherboard itself.
CHANGE THE POWER SUPPLY UNIT
If your motherboard shows no signs of coming on at all, the issue may be with the power supply unit.
Simply test the motherboard with a spare Power Supply Unit to confirm this hypothesis.
If the motherboard does not switch on or displays no indication of life after replacing the Power Supply Unit, this might suggest that the problem is with the motherboard.
CONCLUSION
So, how can you know if your motherboard is faulty or bad? The first step is to confirm that everything is properly linked so that you don’t waste time looking for an issue that doesn’t exist.
Then, continue to inspect the motherboard for any indications of damage, as well as listen for beeps and inspect the status LEDs on the board, if present.
It is critical to test your motherboards as soon as you discover unexpected activity so that you may identify issues before they do more harm to your system.
